Sheet Metal Fabrication Partner in India for Australian Companies
Laser cutting, CNC bending, welding, and finishing to your drawing, under a documented ISO 9001 process, with real export experience and full paperwork for every shipment to Australia.
Precision sheet metal, with the quality check built in
- Laser cutting, punching, bending, and welding under a documented ISO 9001 process
- Enclosures, brackets, frames, and panels, from a single prototype to 10,000 parts
- Powder coat, zinc plating, brushed, or PVD finishes, plus PEM hardware insertion and tapping
- Every batch checked against your drawing before it ships, with reports on request
- Real export experience: full documentation, tracked freight, realistic lead times quoted upfront
Our Sheet Metal Fabrication Process
The same process whether it is a prototype run or a repeat production order.
Design Review & DFM
Your drawings are reviewed for sheet metal manufacturability, bend radii, tolerances, and material choice, before we quote.
Tooling & Fixture Setup
Laser cutting, punching, or bending fixtures are set up for your specific part geometry.
Fabrication & Forming
Parts are cut, bent, and welded to your specification, under our ISO 9001 process.
Finishing & Inspection
Powder coating, plating, or other finishing applied, then every batch inspected against your drawing.
Export Documentation & Shipping
Full export paperwork prepared, then shipped with tracked freight to Australia.
Where Sheet Metal Fabrication Applies
The finish and gauge change by product, but the same cutting, forming, and welding process applies across categories.
Housings and brackets for embedded electronics.
Structural panels and equipment frames built for continuous duty.
Brackets and structural components for vehicle accessories.
Enclosures and housings built to a documented process.
Weather-resistant metal products for outdoor and household use.
Ducting, panels, and structural building components.
What Australian Companies Ask Before Sourcing From India
How is sheet metal fabrication and laser cutting priced?
Price depends on cutting time, setup, material, bends, welding, finish and quantity, so setup cost is spread across larger batches. Send your drawings or DXF files with the material, quantity and delivery address, and your engineer replies with a quote within 24 hours. We fabricate in India and ship to Australia, with no minimum order quantity.
Which materials, thicknesses and finishes can you work with?
Mild steel (CRCA), galvanized steel, stainless 304, and aluminum 5052, 6061, 3003 and 1100, in sheet from 0.5 to 6 mm thick and flat parts up to 3000 × 1500 mm. Finishes include powder coat, zinc plating, brushed and PVD coating. Standard tolerances are ±0.25 to ±0.50 mm, tightening to ±0.13 to ±0.20 mm on precision work.
Does the India-Australia trade agreement (ECTA) actually reduce costs for me?
The India-Australia Economic Cooperation and Trade Agreement reduces import duties on a range of manufactured goods, which can lower the landed cost of your parts. The exact duty depends on your product classification.
What are realistic lead times shipping from India to Australia?
First samples typically take 7 to 10 working days and production runs 2 to 3 weeks from design sign-off, plus sea freight of roughly 26 to 29 days from dispatch if you are not air freighting. Your quote gives the date for your part.
How do you handle quality control on sheet metal parts shipped this far?
Every batch is checked against your drawing before it ships, under our ISO 9001 quality process. Measured reports, first article inspection reports and material certificates are available on request.
Can you work from our drawings, and how is our design protected?
Yes. We work from your drawings, DXF or STEP files, and every drawing is reviewed for sheet metal manufacturability, bend radii, tolerances and material choice before we quote, so questions are settled before fabrication, not after a batch ships. An NDA and any written IP paperwork are signed before any file is shared, and all fabrication is done in-house, nothing subcontracted to an outside vendor.
Is there a minimum order quantity, and who owns the tooling?
There is no minimum order quantity, we work at zero MOQ. Any die or tool built for your part is also yours, outright and immediately, no amortization clause and no lien on it, and we never resell it, repurpose it, or run it for another client.
Trusted By Product Companies Worldwide
Verified reviews from clients in USA, UK, Germany, Australia, Canada and more.
Real Sheet Metal Projects, Shipped and Delivered
Bird Feeder
A stainless steel outdoor product, fabricated and finished for long-term weather exposure.
Eyebrow Tweezer
A premium beauty product taken from a simple idea to a small-batch sheet metal production run.
Box with Water WO Water
A waterproof sheet metal and 3D printed case engineered for medical transport.
READY TO BUILD?
Cut your sheet metal costs without cutting quality
Talk to a real engineer about your sheet metal fabrication run, sized for the Australian market.
